ReportBase:Time Chart Properties

From CustosecWiki
Jump to navigation Jump to search
Time Chart Properties

The time chart displays a series of numeric values for a defined time period. The chart can also show 3 lines indicating i.e. OK, WARNING, CRITICAL values. The line colours can be changed and a customized label can be added.




Property Description Example Property Set Example Property Not Set
Show Legend Displays or hides the chart legend.

Note: The legends layout as such cannot be changed, but the wording of it can be changed with the colour settings (see below)
RB TimeChart Legend.png
RB TimeChart NoLegend.png
Line Widths (Date, Warn, Critical Lines) Controls the thickness of the 3 lines. Maximum value is 9 and minimum value is 1 and the step width is 0.1.

The example on the left side shows the chart with Line Widths of Data=1/Warn=5/Critical=9 to show the difference.

The example on the right side shows the same chart with Line Width of Data=3/Warn=2/Critical=2.
RB TimeChart ThickLine.png
RB TimeChart ThinLine.png
Line Colour (Date, Warn, Critical Lines) and texts Controls the colour of the 3 lines, which can be picked with the colour picker. In the text field any text can be entered. This will be used for the legend, if the legend is to be shown (see above). The tick box on the right allows to show or not to show the Warn/Critical lines.

The example on the left side shows the chart with slightly changed texts for the legend and different colours.

The example on the right side shows the same chart without the Warn and the Critical lines.
RB TimeChart LineColourText.png
RB TimeChart NoLineColourText.png
Display Lower/Upper Limit Defines the settings for the lower and upper limits of the y-axis.

Values that are out of this range will not be displayed. This setting is carried over from the Manage Rules and can be changed here within the range given in the manage rules.
RB TimeChart SmallRange.png
RB TimeChart NormalRange.png